SSL Configuration

Available SSL Configuration Tasks

Omnibus-GitLab supports several common use cases for SSL configuration.

  1. Allow https connections to GitLab instance services
  2. Configure public certificate bundles for external resource connections

Host Services

Administrators can enable secure http using any method supported by a GitLab service.

Service Manual SSL Let’s Encrypt
Primary GitLab Instance Domain Yes Yes
Container Registry Yes Yes
Mattermost Yes Yes
GitLab Pages Yes No

Let’s Encrypt Integration

Primary GitLab Instance

Note: Introduced in GitLab version 10.5 and disabled by default. Enabled by default in GitLab version 10.7 and later if external_url is set with the https protocol and no certificates are configured.

Note: In order for Let’s Encrypt verification to work correctly, ports 80 and 443 will need to be accessible to the Let’s Encrypt servers that run the validation. Also note that the validation currently does not work with non-standard ports.

Caution Administrators installing or upgrading to GitLab version 10.7 or later and do not plan on using Let’s Encrypt should set the following in /etc/gitlab/gitlab.rb to disable:

letsencrypt['enable'] = false

Add the following entries to /etc/gitlab/gitlab.rb to enable Let’s Encrypt support for the primary domain:

letsencrypt['enable'] = true                      # GitLab 10.5 and 10.6 require this option
external_url ""	  # Must use https protocol
letsencrypt['contact_emails'] = [''] # Optional

Maintenance Tip

Certificates issued by Let’s Encrypt expire every ninety days. The optional contact_emails setting causes an expiration alert to be sent to the configured address when that expiration date approaches.

GitLab Components

Note: Introduced in GitLab version 11.0

Follow the steps to enable basic Let’s Encrypt integration and modify /etc/gitlab/gitlab.rb with any of the following that apply:

registry_external_url ""     # container registry, must use https protocol
mattermost_external_url "" # mattermost, must use https protocol
#registry_nginx['ssl_certificate'] = "path/to/cert"      # Must be absent or commented out

Under the Hood

The Let’s Encrypt certificate is created with the GitLab primary instance as the primary name on the certificate. Additional services such as the registry are added as alternate names to the same certificate.

Note in the example above, the primary domain is and the registry domain is Administrators do not need to worry about setting up wildcard certificates.

Automatic Let’s Encrypt Renewal

Note: Introduced in GitLab 10.7.

Default installations schedule renewals after midnight on every 4th day. The minute is determined by the value in external_url to help distribute the load on the upstream Let's Encrypt servers.

Explicitly set renewal times by adding the following to /etc/gitlab/gitlab.rb:

# This example renews every 7th day at 12:30
letsencrypt['auto_renew_hour'] = "12"
letsencrypt['auto_renew_minute'] = "30"
letsencrypt['auto_renew_day_of_month'] = "*/7"

Disable automatic renewal with the following in /etc/gitlab/gitlab.rb:

letsencrypt['auto_renew'] = false

Manual Let’s Encrypt Renewal

Renew Let’s Encrypt certificates manually using one of the following commands:

# gitlab-ctl reconfigure
# gitlab-ctl renew-le-certs


The above commands require root privileges and only generate a renewal if the certificate is close to expiration. Consider the upstream rate limits if encountering an error during renewal.

Connecting to External Resources

Some environments connect to external resources for various tasks. Omnibus-GitLab allows these connections to use secure http (https).

Default Configuration

Omnibus-GitLab ships with the official collection of trusted root certification authorities which are used to verify certificate authenticity.

Other Certificate Authorities

Omnibus-Gitlab supports connections to external services with self-signed certificates.

Compatibility Note

Custom certificates were introduced in GitLab version 8.9.

Further Reading For installations that use self-signed certificates, Omnibus-GitLab provides a way to manage these certificates. For more technical details how this works, see the details at the bottom of this page.

Install Custom Public Certificates:

  1. Generate the PEM or DER encoded public certificate from your private key certificate.
  2. Copy the public certificate file only into the /etc/gitlab/trusted-certs directory.
  3. Run gitlab-ctl reconfigure.


git-LFS and other embedded services written in golang report custom certificate signed by unknown authority

Note: In GitLab 11.5, the following workaround is no longer necessary, embedded golang apps now use the standard GitLab certificate directory automatically.

The gitlab-workhorse and other services written in golang use the crypto/tls library from golang instead of OpenSSL.

Add the following entry in /etc/gitlab/gitlab.rb to work around the issue as reported:

gitlab_workhorse['env'] = {
  'SSL_CERT_DIR' => '/opt/gitlab/embedded/ssl/certs/'


If you have installed GitLab to a path other than /opt/gitlab/ then modify the entry above with the correct path in your operating environment.

Reconfigure Fails Due to Certificates

ERROR: Not a certificate: /opt/gitlab/embedded/ssl/certs/FILE. Move it from /opt/gitlab/embedded/ssl/certs to a different location and reconfigure again.

Check /opt/gitlab/embedded/ssl/certs and remove any files other than that aren’t valid x509 certificates.

Under the Hood

Running gitlab-ctl reconfigure constructs symlinks named from the subject hashes of your custom public certificates and places them in /opt/gitlab/embedded/ssl/certs/.

Broken symlinks in /opt/gitlab/embedded/ssl/certs/ will be automatically removed.

Files other than cacert.pem and stored in /opt/gitlab/embedded/ssl/certs/ will be moved into the /etc/gitlab/trusted-certs/.

Custom Certificates Missing or Skipped

GitLab versions 8.9.0, 8.9.1, and 8.9.2 all mistakenly used the /etc/gitlab/ssl/trusted-certs/ directory. This directory is safe to remove if it is empty. If it still contains custom certificates then move them to /etc/gitlab/trusted-certs/ and run gitlab-ctl reconfigure.

If no symlinks are created in /opt/gitlab/embedded/ssl/certs/ and you see the message “Skipping cert.pem” after running gitlab-ctl reconfigure, that means there may be one of two issues:

  1. The file in /etc/gitlab/ssl/trusted-certs/ is a symlink
  2. The file is not a valid PEM or DER-encoded certificate

Test the certificate’s validity using the commands below:

$ /opt/gitlab/embedded/bin/openssl x509 -in /etc/gitlab/trusted-certs/example.pem -text -noout
$ /opt/gitlab/embedded/bin/openssl x509 -inform DER -in /etc/gitlab/trusted-certs/example.der -text -noout

Invalid certificate files produce the following output: sh unable to load certificate 140663131141784:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:701:Expecting: TRUSTED CERTIFICATE

Let’s Encrypt Certificate signed by unknown authority

The initial implementation of Let’s Encrypt integration only used the certificate, not the full certificate chain.

Starting in 10.5.4, the full certificate chain will be used. For installs which are already using a certificate, the switchover will not happen until the renewal logic indicates the certificate is near expiration. To force it sooner, run the following

# rm /etc/gitlab/ssl/HOSTNAME*
# gitlab-ctl reconfigure

Where HOSTNAME is the hostname of the certificate.

Let’s Encrypt fails on reconfigure

Let’s Encrypt may fail if your server isn’t able to reach the Let’s Encrypt verification servers or vice versa:

letsencrypt_certificate[] (letsencrypt::http_authorization line 3) had an error: RuntimeError: acme_certificate[staging] (/opt/gitlab/embedded/cookbooks/cache/cookbooks/letsencrypt/resources/certificate.rb line 20) had an error: RuntimeError: [] Validation failed for domain

If you run into issues reconfiguring GitLab due to Let’s Encrypt make sure you have ports 80 and 443 open and accessible.

Details on how GitLab and SSL work

GitLab-Omnibus includes its own library of OpenSSL and links all compiled programs (e.g. Ruby, PostgreSQL, etc.) against this library. This library is compiled to look for certificates in /opt/gitlab/embedded/ssl/certs.

GitLab-Omnibus manages custom certificates by symlinking any certificate that gets added to /etc/gitlab/trusted-certs/ to /opt/gitlab/embedded/ssl/certs using the c_rehash tool. For example, let’s suppose we add customcacert.pem to /etc/gitlab/trusted-certs/:

$ sudo ls -al /opt/gitlab/embedded/ssl/certs
total 272
drwxr-xr-x 2 root root   4096 Jul 12 04:19 .
drwxr-xr-x 4 root root   4096 Jul  6 04:00 ..
lrwxrwxrwx 1 root root     42 Jul 12 04:19 7f279c95.0 -> /etc/gitlab/trusted-certs/customcacert.pem
-rw-r--r-- 1 root root 263781 Jul  5 17:52 cacert.pem
-rw-r--r-- 1 root root    147 Feb  6 20:48 README

Here we see the fingerprint of the certificate is 7f279c95, which links to the custom certificate.

What happens when we make an HTTPS request? Let’s take a simple Ruby program:

require 'openssl'
require 'net/http'


This is what happens behind the scenes:

  1. The “require openssl” line causes the interpreter to load /opt/gitlab/embedded/lib/ruby/2.3.0/x86_64-linux/
  2. The Net::HTTP call then attempts to read the default certificate bundle in /opt/gitlab/embedded/ssl/certs/cacert.pem.
  3. SSL negotiation occurs.
  4. The server sends its SSL certificates.
  5. If the certificates that are sent are covered by the bundle, SSL finishes successfully.
  6. Otherwise, OpenSSL may validate other certificates by searching for files that match their fingerprints inside the predefined certificate directory. For example, if a certificate has the fingerprint 7f279c95, OpenSSL will attempt to read /opt/gitlab/embedded/ssl/certs/7f279c95.0.

Note that the OpenSSL library supports the definition of SSL_CERT_FILE and SSL_CERT_DIR environment variables. The former defines the default certificate bundle to load, while the latter defines a directory in which to search for more certificates. These variables should not be necessary if you have added certificates to the trusted-certs directory. However, if for some reason you need to set them, they can be defined as environment variables. For example:

gitlab_rails['env'] = {"SSL_CERT_FILE" => "/usr/lib/ssl/private/customcacert.pem"}